Audio Technica Wireless Tie Clip (Lapel) System - ATW2110a/P

 Audio Technica 2000a Belt Pack Wireless System

The best wireless systems use True Diversity technology to eliminate dropouts, and the ATW-2110 is no exception.   The receiver contains two independent radios to pick-up the transmitted signal.

The new 2000 Series UHF True Diversity Wireless Microphone Systems are Audio-Technica's latest entry in its extensive line of professional wireless systems. The 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses, and places of worship. It offers true diversity operation, easy setup, automatic frequency scanning with interference-free performance, and all the advantages of a high-quality, professional wireless system at an extremely affordable price.

Features
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning finds an open channel at the touch of a button
- All 10 user-switchable channels are compatible -- for easy use with multiple systems; no confusing frequency groups
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
- Balanced XLR and unbalanced 1/4 in. output jacks enable use with a wide variety of audio gear
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

OVERALL SYSTEM SPECIFICATIONS

• Operating Frequency: 656.125 to 678.500 MHz
• Number of Channels: 10 total
• Frequency Stability: ±0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Normal Deviation: ±5 kHz
• Operating Range: 300' typical
• Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
• Frequency Response: 100 Hz to 15 kHz

RECEIVER SPECIFICATIONS

• Receiving System: Dual independent RF sections, automatic-switching diversity
• Image Rejection: 55 dB nominal, 50 dB minimum
• Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
• Total Harmonic Distortion: <1% (10 kHz deviation at 1 kHz)
• Sensitivity: 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
• Intermediate Frequency: 65.75 MHz, 10.7 MHz
• Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
• Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
• Output Connectors: Unbalanced: 1/4" (6.3 mm) phone jack
• Balanced: XLRM-type
• Power Supply: 120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply
• Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) H x 6.39" (162.2 mm) D
• Weight: 2.2 lbs (1.0 kgs)
• Accessories Included: Two flexible UHF antennas, rack-mount adapters, AC adapter

BODY-PACK TRANSMITTER SPECIFICATIONS

• RF Power Output: 12 mW
• Spurious Emissions: Under federal regulations
• Input Connections: High impedance, low impedance, bias
• Batteries: Two 1.5V AA alkaline (not included)
• Current Consumption: 150 mA typical
• Battery Life: Approximately 9 hours (depending on battery type and use pattern)
• Dimensions: 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
• Net Weight: 2.82 oz (80 g)