AUDIO TECHNICA Camera-mount UHF Wireless Systems 1823

PLEASE NOTE: This product is stocked to order only so please email us for availability before purchasing.

Includes ATW-R1820 dual-channel receiver, ATW-T1801 UniPak® body-pack transmitter, ATW-T1802 plug-on transmitter and a lavalier microphone

With UHF reception (996 frequencies user-selectable in 25 kHz steps), Audio-Technica’s new 1800 Series camera-mount wireless microphone systems provide extremely flexible, professional, and easy-to-use portable wireless solutions. The 1800 Series is available in dual-channel and single-channel systems.

For simultaneous operation of two microphones, dual-channel 1800 wireless systems include the ATW-R1820 dual receiver with two completely independent receiver channels in a single unit. Dual balanced outputs enable signals to be mixed, or independently assigned to each output. Independent audio level controls provide flexible audio mixing and monitoring possibilities. 

Two completely independent receiver channels in a single unit, for simultaneous operation of two microphones (dual-channel systems)

Compact receiver is easy to mount on a camera

• UHF reception with 996 frequencies selectable in 25 kHz steps
• Automatic frequency scanning for easy selection of open channels
• Tone Lock™ squelch system eliminates interference when transmitter is off
• Two independent balanced outputs (dual-channel systems)
• Headphone monitor output with independent level control
• Battery fuel-level indicators on transmitters and receiver
• Soft-touch controls for easy frequency selection
• True Diversity operation for resistance to multi-path interference and dropouts
• LCD frequency and battery status display with backlight
• Antenna and AF Peak LED indicators
• Dual-channel receiver can operate in single-receiver mode to extend battery life when only one   audio channel is in use (dual-channel systems)
• Transmitters operate in low or high transmission modes to conserve battery life/maximize power
• Easy, user-friendly operation
• Clear, natural sound quality
• Powered by AA batteries
• System components of the 1800 Series and 3000 Series Wireless Systems can be used interchangeably

  OVERALL SYSTEM SPECIFICATIONS
  Operating Frequencies	UHF Band D: 655.500 to 680.375 MHz
  Number of Channels	996 total per band (25 kHz increments)
  Frequency Stability	±0.005%, Phase Lock Loop frequency control
  Modulation Mode	FM
  Normal Deviation	±10 kHz
  Operating Range	100 m (300') typical
  Operating Temperature Range	23° F (- 5° C) to 113° F (45° C)
  Frequency Response	70 Hz to 15 kHz

  RECEIVER SPECIFICATIONS
  Receiving System	Dual independent RF sections, automatic-switching diversity
  Image Rejection	>50 dB typical
  Signal-to-noise Ratio	104 dB at 30 kHz deviation (A-weighted), maximum modulation 37 kHz
  Total Harmonic Distortion	<1% (±10 kHz deviation at 1 kHz)
  Sensitivity	25 dBµV, (S/N 60 dB at 5 kHz deviation, A-weighted)
  Audio Output	Balanced: 27 mV (at 1 kHz, ±5 kHz deviation)
  Output Connector	3-pin mini XLR (TA3M-type)
  Monitor Headphone Output	(typical) 35 mW max., 32 ohm load (per channel)
  Monitor Headphone Jack	3.5 mm TRS, signals on both Tip and Ring
  External Power Requirements	12V DC nominal, 500 mA
  Batteries	ATW-R1820: Six 1.5V AA alkaline (not included); ATW-R1810: Four 1.5V AA alkaline (not included)
  Current Consumption	Dual-channel Operation: 600 mA typical; Single-channel Operation 350 mA typical
  Battery Life	Dual-channel Operation (ATW-R1820): 6 hours typical* Single-channel Operation (ATW-R1810): 10 hours typical* * depending on battery type and use pattern
  Dimensions	ATW-R1820: 85.0 mm (3.35") W x 133.0 mm (5.24") H x 36.0 mm (1.42") D ATW-R1810: 75.0 mm (2.95") W x 125.0 mm (4.92") H x 32.0 mm (1.25") D
  Net Weight	ATW-R1820: 425 grams (15.0 oz) (without batteries) ATW-R1810: 300 grams (10.5 oz) (without batteries)

  BODY-PACK TRANSMITTER SPECIFICATIONS
  RF Power Output	High: 30 mW; Low: 10 mW, nominal
  Spurious Emissions	Under federal regulations
  Dynamic Range	>105 dB, A-weighted
  Input Connections	High impedance, low impedance, bias
  Batteries	Two 1.5V AA alkaline (not included)
  Current Consumption	High: 180 mA; Low: 160 mA, typical
  Battery Life	Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  Dimensions	66.0 mm (2.60") W x 87.0 mm (3.43") H x 24.0 mm (0.94") D
  Net Weight	80 grams (2.8 oz) (without

  PLUG-ON TRANSMITTER SPECIFICATIONS
  RF Power Output	High: 30 mW; Low: 10 mW, nominal
  Spurious Emissions	Under federal regulations
  Input Connector	3-pin locking XLRF-type
  Batteries	Two 1.5V AA alkaline (not included)
  Current Consumption	High: 180 mA; Low: 160 mA, typical
  Battery Life	Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern
  Dimensions	40.0 mm (1.57") x 111.0 mm (4.37") x 40.0 mm (1.57")
  Net Weight	199 grams (7.0 oz) (without batteries)

  Gregory Audio Visual provide quality products and accessories for all your Audio Visual needs.  We have a vast range of Connectors, AV leads,  Disco Equipment , Lighting, Amplification, Screens, Data Video & Multimedia Projectors, Stands and Brackets for Plasma & LCD TV's.  We are also authorised dealers for NEC, Sony, Mitsubishi, Sanyo, Audio Technica, Shure,  Sennheiser, Trantec, Behringer, Electrovision, Soundlab & Skytec products. We hire  Audio Visual  Equipment for Conferences, Events, Seminars and meetings throughout the Lancashire area and have a fully equipped Video & DVD and PowerPoint Production  Studio Facility. We take pride in providing the highest level of customer service and should you have any queries about this particular product or service or need any further information please do not hesitate to contact us.  Our retail shop and trade counter is situated next door to Starlight Dancewear at Unit 1, St Aidan's Avenue, Mill Hill,  Blackburn, Lancashire. BB2 4EA and is open Monday to Friday 9am to 5pm.